Quick Dry Primer/Seal

Interior dry wall and plasterboard sealer

Sealer for new or previously painted interior walls and ceilings:
Dry wall, plaster board, composite boards, concrete and fibrous plaster
Dries in 4 Hours
Spread rate: 10-12 sq/m per litre
Pack sizes: 1L 4L and 10L
Use Pigmented sealer A 200 for wet areas such as bathroom and kitchens

Alkyd pigmented Sealer

Interior wet area sealer for bathroom and kitchens

Dries in 16 hrs at 20 degrees celcius
Spread rate : 10-12 sq/m per litre
Pack sizes : 500ml 1L and 4L
Clean up with turps

Kitchen and Bathroom

A top quality pearl finish acrylic specifically formulated for use in kitchens and bathrooms. Mildew proof for six years.

Wait 4 hours between coats before painting
Spread rate: 10-12 sq/m per litre
Pack size: 1L and 2L
Colour : White (If you come into a store you can purchase any light shade colour.)

Duralon Velvet Low sheen

Premium low sheen velvet acrylic topcoat

Low odour, low spatter easy application
Cleans easily, resists stains and marring
Spread rate: 10-12 sq/m
Colour: White(Thousands of colours can be made in store)

Imperlon Semi gloss

Premium semi-gloss waterbased enamel

Can be used on doors, architraves, furniture, panneling, cabnets, desks, wall and celings.
Spread rate: 10-12 sq/m per litre
Colour:White (Thousands of colours can be made in store)

Celing White-Flat finish

High opacity flat celing paint

Can be used for new and previously painted wallboards
Spatter resistant easy clean up water based flat finish
Spread rate:10-12sq/m per litre
Colour: White

Acrylic Wall board sealer

Acylic wallboard sealer

Sealer for new or previously painted interior walls and ceilings:
Dry wall, plaster board, composite boards, concrete and fibrous plaster
Dries in 4 Hours
Spread rate: 10-12 sq/m per litre

Acrylic Satin

Interior/Exterior vinyl satin acrylic

Long lasting affordable coating to be used on walls which have been suitably primed surfaces
Spread rate:10-12 sq/m per litre
White(light colours can be made in store)

All Prices are for white base only unless specified

	How much paint do I need?
	Step 1: Measure length x breadth x height of walls = Total surface in m2 ( Insert quantity in Box A) Step 2: Look on paint label or product data sheet for spread rate (Insert spread rate in Box B) Step 3: Add amount of coats required (Insert in Box C) Box A m² (total area of a room) Box B m²/L (spread rate of paint) Box C coats (number of paint coats) Estimated litres required: