Seahorse Formula 1000

4L Price:$169.00

Anti - foul: Timber /Fibre glass/Steel Vessels
Do not use on Aluminium Vessels

•Compliant with NZ standards for marine antifouling
•Mildly ablative allowing ease of clean without excessive film loss
•Very effective on a wide range of marine fouling organisms
•Attractive colour range
•Long life (2 years at 150 microns dry)

Apply a minimum of two coats at 5-6sqm/litre Dry Film Thickness Dry film per coat 75 microns

Seahorse Propulsion

4L Price:$174.00
1L Price:$75.00

Anti-Foul: Aluminium Vessels

•Can be used on high speed propulsion vessels
•Ablative - washed not scrubbed
•Easy end of season repaint

Apply 2 coats at 5-6 Sq/m per litre per coat to achieve150 microns dry film thickness.

Comes in white, black, blue and red.

Dont Slip Deck Paint

4L Price :$104.00
1L Price :$49.00

Where "Dont Slip"can be used:

Boat decks, patio decks, steps, concrete and fibrolite decks, ramps and light industrial non-skid floors

•Very hard acrylic polymer
•Clean with water
•Attractive finish
•Effective non-slip coating
•Cost effective
•Can be over-glazed

Comes with Free Roller

320 Primer/Undercoat

4L Price :$192.00
1L Price :$58.40

Choose pack size

Primer Undercoat is a single pack Primer Undercoat designed especially for marine
use where anticorrosive properties are not required such as timber, plywood and
fibreglass.

Primer Undercoat has excellent sealing, filling and sanding properties
essential for a preparation coat.

Marine top coat

331 Gloss Enamel Top Coat

4L Price :$185.60
1L Price :$53.00

331 Gloss Enamel is a highly water resistant finishing coat for topsides, superstructures, boot-top, decks, etc. of ships and recreational craft. It has
excellent durability, good gloss and colour retention. Always apply primer undercoat (320 Transomarine Undercoat )
Available in twelve colours and shades. Apply one or two coats @ 30 microns.

	How much paint do I need?
	Step 1: Measure length x breadth x height of walls = Total surface in m2 ( Insert quantity in Box A) Step 2: Look on paint label or product data sheet for spread rate (Insert spread rate in Box B) Step 3: Add amount of coats required (Insert in Box C) Box A m² (total area of a room) Box B m²/L (spread rate of paint) Box C coats (number of paint coats) Estimated litres required: